Help center

How to send a Letter of Intent

Set what each saved Letter of Intent offers, then send a Single, Dual or Triple offer from the calculator. You sign, and the seller gets a copy.

A Letter of Intent (LOI) tells the seller what you intend to offer. You set each letter up in Documents, then send it from the calculator (or from Saved Properties). You can send one offer, or a combo of two or three, in a single letter. You sign; the seller gets a signed copy and does not sign.

Why it matters

Sellers often do better when they can choose between structures. Setting what each saved LOI offers keeps the send list clear: a cash letter stays a cash letter, and a combo letter is ready to go as a combo. The seller sees the options in one document, and you have one record of what went out.

Steps

Set up the Letter of Intent in Documents

  1. Open Documents, then Start a document. In the section "Use your own PDF", choose what the document is: "Letter of Intent", or "Partnership LOI" if that is the letter you are saving. Type a name (for example "Letter of Intent"). If you have not named it yet, the page says "Name this document first: that name is how you'll find it later." Then choose a PDF. This step is charged only if the button shows a credit cost.
  2. On "Check the pages before you save", look at every page. The line "Only your company signs an LOI. The seller gets a signed copy." is there because an LOI has nothing to choose about who signs. You can add a "Short description (optional)"; it shows under this LOI's name when someone sends one, and typing stops at 120 characters. "Name recipients see" heads the signing email and the signing page. Choose "Save for the company". When it is approved, the page says "Saved for your company" and "It's approved and ready to send." Then choose "Go to your documents".
  3. On the Documents list, under that LOI's name and description, you will see "This LOI offers:" and the line "Not set: the sender chooses Single, Dual or Triple each time." Choose "Set what it offers". Tick one or more of "Cash", "Creative financing" and "Partnership". The line under the ticks shows what that makes, for example "Single offer: Cash." or "Dual offer: Cash or creative financing. The seller picks one." Three ticks make a Triple offer. Choose "Save" (it reads "Saving…" while it works), or Cancel to leave it as it was. Later, use "Change" to edit it. Clearing every tick and saving puts it back to not set. Only an owner or admin can change this, and it is not part of the signed PDF, so it does not undo the LOI's approval.
  4. If this is a Partnership LOI and you tick only one box, that box has to be Partnership. The page will refuse any other single choice.

Send it from the calculator

  1. On the calculator page, choose "Send LOI". The window "Send Letter of Intent" opens. You will see each saved LOI by its name and short description, plus "Use a different PDF" ("For this send only. It isn't added to your documents."). Nothing is pre-selected. Next stays off until you pick, and the footer reads "Choose which Letter of Intent to send." Saved Properties shows the same list. Dual and Triple offers go out from the calculator page or Saved Properties; other doors send a Single offer only, with the seller still copied.
  2. If you have set what that LOI offers, it appears once, with no extra choice: for example "Single offer: Cash." or "Dual offer: Cash or creative financing. The seller picks one." Choose it, then Next. The next step goes straight to that offer's terms, with nothing left to tick. If a send does not match the setting, it is refused: "This LOI is set to offer Cash. Choose another LOI, or change what it offers on the Documents page."
  3. If that LOI is not set, or you choose "Use a different PDF", you pick the type under its name: "Single offer. One offer.", "Dual offer. Two offers. The seller picks one.", or "Triple offer. All three offers. The seller picks one." Then choose Next. For a Single that is not already fixed, the next step says "Choose the option to offer." For a Dual it says "Choose the two options to offer." The choices there are "Cash", "Seller financing" and "Partnership". A Triple takes all three, so there is nothing to tick. "The Partnership option isn't available" if the Partnership switch is off; a Triple is then hidden, and a set LOI that includes Partnership cannot be picked.
  4. The figures fill from the calculators and can be edited. A blank term does not stop the send: the screen says, for example, "Interest rate is blank. It prints “To be discussed”." A blank balloon prints "None" and is not listed as a warning. If Price less Down payment does not match Amount financed, you will see a caution such as "Price less down payment is $290,000, but Amount financed is $205,000. Check these before you send." It does not block the send. If the Partnership tab is incomplete, you may see "The Partnership tab still needs the loan amount, so the seller's share in the table prints “To be discussed”."
  5. "Open until" is required on every LOI. With no date, the footer says "Choose the date this Letter of Intent is open until." A date that has already passed says "The open until date has passed. Choose a later one." Today is allowed. Then choose "Check the pages".
  6. On a Dual or Triple, the options print on a page attached to your own LOI, in the same file you sign. That page is headed "Your options" and reads "This Letter of Intent gives you two options. Choose one." (or "three options"). The blocks are labelled "Option A: Cash", "Option B: Seller financing" and "Option C: Partnership", in the order you offered them. Price and term blanks on your own pages print "See attached". The page says the letter is non-binding, that the option the seller chooses goes into the purchase contract, and that the options are open until the date you set.
  7. On a Single, the terms print on your own blanks when those blanks can hold them. A blank for an option you did not offer, such as a Cash price on a Seller financing letter, prints "Not offered". If a term with a value has no blank to go in, the whole offer moves to an attached page headed "Your offer", and the block is labelled "Seller financing" (or Cash, or Partnership) with no "Option A". A Partnership Single on a saved Partnership LOI keeps its Scenario table as the last page, with the seller's share shown as "Your share".
  8. Under "Who gets a copy", the first row is "Seller". The line reads "Seller gets a copy and doesn't sign." There is no Signs / Gets a copy switch. Send stays off until the seller's name and a valid email are in. Choose "Send for signature". Sending uses credits, and the button shows how many. After it goes, you will see "Sent. The seller gets a signed copy once your company has signed."

Follow it after you send

  1. The same record appears on the property's card on Saved Properties, on the deal page under "Documents sent for this deal" (including a draft deal, once anything has been sent for it), and under Documents, then "Sent for signature" (or "Documents you sent", if you are not an owner or admin). The title looks like "Standard LOI · Dual offer". Under it is the terms line, for example "Option A: Cash, $265,000 · Option B: Seller financing, $300,000 · Open until Nov 18". Changing the calculator later does not change that line.
  2. The row's status, in order, is:
    • Current — a tag on the live version, not a status line of its own. A revision that has replaced it is tagged Replaced.
    • Waiting for your signature — it has gone to you to sign, and the seller has not been sent a copy yet.
    • Sending the seller's copy — you have signed, and the copy is on its way. If it still has not gone after about a day, the row reads "The seller's copy hasn't gone out yet".
    • Sent to seller, Nov 9 — the copy has gone (the day is the company's signing day, without the year).
    • Sent to seller, Nov 9 · Email opened Nov 9 — a hint that the seller's copy was opened. It is never worded as "viewed", "read" or "seen". Some mail apps open emails on their own, and blocked images can hide an open, so this is not proof the seller read it.
    • Bounced. — in red, for example "Bounced. Test Seller didn't get this LOI (seller@example.com). Revise it with the right address." If a revision has already been sent but its copy has not gone yet, the last sentence is "Its revision hasn't gone out yet."
    • Withdrawn — you revised before signing, or you withdrew it. The seller is not emailed about an LOI they never received.
    • Expired Nov 18 — the open-until date has passed, after the copy went out. An LOI you have not signed stays "Waiting for your signature" even after that date. Expiry is shown when the row is read; nobody is emailed.
    • Replaced by the LOI of Nov 9 — after a revision's copy has gone out, often as "Sent to seller, Nov 5 · Replaced by the LOI of Nov 9". View still opens the old PDF. There is no Revise on a replaced row. An LOI sent before this record existed keeps the Sent list's usual words, such as "Signed by everyone".
  3. Choose Revise on a current row (the owner, or the person who sent it, can do this). The window is headed "Revise Letter of Intent" and opens on the same LOI, options, terms and seller. If you had already signed, it reads "The seller's copy will say this replaces the Letter of Intent sent Nov 9." After you send and sign, the new copy email includes "This replaces the Letter of Intent sent Nov 9." If you had not signed, it reads "You hadn't signed the earlier one, so sending this withdraws it." The old signing link then stops working. If that saved LOI has since been set to offer something else, or is no longer on the list, Revise starts at the list and keeps the terms. A Revise link on the Sent list or the deal page opens on the property's card on Saved Properties.
  4. On Sent for signature you can also View the document, Download signed (a ZIP with the signed document, the Signing record and the Audit Trail) once the company has signed and the copy is filed, or Withdraw while it is still waiting for your signature. Signature status is checked on a schedule, so it can lag a signature by a few minutes.

Good to know

  • "Creative financing" is the tick on the Documents page only. The send screen and the seller's options page say "Seller financing".
  • Single, Dual and Triple are each one document, with one signing and one record. They are not several letters sent together.
  • The seller never signs an LOI, and does not record a choice in the app. They answer by email or phone.
  • "Open until" is the app's deadline, shown on the row and on the attached page. If your own PDF also names a different deadline in its wording, the app does not change that wording. Make sure your pages say the same.
  • A Partnership letter's profit-share wording should be reviewed by a lawyer before you rely on it.
  • [VERIFY] The Send for signature button shows the credit cost. Earlier Help drafts and production tests used 12 credits; confirm the live amount before publishing if it can change.

All help articles